To choose the best industrial concrete floor coatings for your installation, the initial thing to consider is the criteria that will be used in your choice. Almost all types of flooring requirements can be addressed by many industrial concrete floor coatings processes. Identify the requirements for your certain floors, which can be any of the following:
1) For Repair and Protection
Several floor coatings options are suitable for floor maintenance, repairing damaged surfaces and giving protection against different types of floor abuse like chemical spills, abrasive impacts or physical loads, to name a few.
2) For Quality Performance and Durability
Contractors of industrial concrete floor coverings can install high-performance floors that last long periods of time. The coatings thickness used and the type of coating product applied can vary the durability and strength of installed floor covering systems.
3) For Beautifying Drab-Looking Floors
Industrial concrete floor coverings can transform floors in any area of the facility, such as employee rooms, store floors, cargo bays, and others.
4) For Cheaper and Practical Floor Solutions
When looking for a minimum amount of expenses for your industrial floor project, this is not impossible with industrial concrete floor coverings that are less expensive but still work well, adjusting to your budget and project requirements together. Check here.
Concrete Coatings for Floor Repair
When signs of damage to the floor appear, facility managers should not waste time replacing the industrial concrete floor covering system. Postponing the work will have negative consequences, such as:
– Unsafe floors that can cause potential accidents for building occupants, because of uneven floors, low friction or non-slip surfaces.
– Floors looking dirty despite constant cleaning.
– Unhygienic floors that stimulate the growth of harmful bacteria that lodges in cracks in floors that are difficult to clean.
– Worsen floor damage as time passes.
Epoxy based fillers can be applied to level the holes and eliminate irregularities in the surfaces. For deep cracks, sand or quarter-gallon epoxy fillers should be used to fill the bottom. For fine cracks, sanding will …