To choose the best industrial concrete floor coatings for your installation, the initial thing to consider is the criteria that will be used in your choice. Almost all types of flooring requirements can be addressed by many industrial concrete floor coatings processes. Identify the requirements for your certain floors, which can be any of the following:
1) For Repair and Protection
Several floor coatings options are suitable for floor maintenance, repairing damaged surfaces and giving protection against different types of floor abuse like chemical spills, abrasive impacts or physical loads, to name a few.
2) For Quality Performance and Durability
Contractors of industrial concrete floor coverings can install high-performance floors that last long periods of time. The coatings thickness used and the type of coating product applied can vary the durability and strength of installed floor covering systems.
3) For Beautifying Drab-Looking Floors
Industrial concrete floor coverings can transform floors in any area of the facility, such as employee rooms, store floors, cargo bays, and others.
4) For Cheaper and Practical Floor Solutions
When looking for a minimum amount of expenses for your industrial floor project, this is not impossible with industrial concrete floor coverings that are less expensive but still work well, adjusting to your budget and project requirements together. Check here.
Concrete Coatings for Floor Repair
When signs of damage to the floor appear, facility managers should not waste time replacing the industrial concrete floor covering system. Postponing the work will have negative consequences, such as:
– Unsafe floors that can cause potential accidents for building occupants, because of uneven floors, low friction or non-slip surfaces.
– Floors looking dirty despite constant cleaning.
– Unhygienic floors that stimulate the growth of harmful bacteria that lodges in cracks in floors that are difficult to clean.
– Worsen floor damage as time passes.
Epoxy based fillers can be applied to level the holes and eliminate irregularities in the surfaces. For deep cracks, sand or quarter-gallon epoxy fillers should be used to fill the bottom. For fine cracks, sanding will eliminate the irregularity of the coating and will mix the edges to eliminate the crack. In cases of large cracks, it is necessary to repair the base of the floor before any coating system can be installed.
Concrete Coatings for Floor Make-Over
The coatings of industrial concrete floors transform the floors of the facilities to their original appearance. You can choose any of the following, according to your unique requirements:
1) Bright Coatings
The transparent epoxy gloss is a standard option for the embellishment of floors. The colorless formulation can hide small imperfections of the floor.
2) Satin Coats
The shark grips mixed in the lining of industrial concrete floors give a rough texture to the floor, leaving the top layer with a satiny sheen that conceals minor damages, and makes the surfaces easy to clean.
3) Colored Chips
Chips of various colors applied in still wet upper layers can improve the appearance of the floors. The chips are emitted in measured quantities and certain distances from each batch or are applied using a bucket with holes in the bottom, to achieve the correct density and appearance of the chips on the surface.
The choice of the most suitable floor coating products should be a careful balance of monetary considerations and practical or functional requirements. When cost is the most important factor in the selection of coatings, facility managers should remember to insist on quality and excellent performance. The cost savings that sacrifice quality are useless, because of future repairs and necessary work in the future. Click here for more information: https://www.resinfloorcoatingsuk.com/common-uses-for-epoxy-wall-paint/